DIY MEMBUKA DAN MEMASANG MENTOL HADAPAN PROJECTOR HEAD LAMP(REMOVE AND REPLACING BULB FROM PROJECTOR HEAD LAMP)

1. Mentol depan belah kiri dah terbakar sebulan tak sempat nak tukar.Petang ni den ado masa nak tokar.Projector lamp ni susah sikit nak buka dia tak sama dengan head lamp biasa maklumlah dia banyak mentol,tapi tak lah sesusah mana kalau kita sabar sikit..ok kita mula sekarang..(my projector head lamp was burned so its time to do diy again.

Peralatan(Tools needed)

Tangan dengan screw driver aje(screwdriver)

1.Buka breket Rellay dahulu kerana ia menghalang mentol dari ditarik keluar.(open rellay bracket first cause it blocking our hand from pulling the rubber cover out.)

kotak rellay(Rellay box)

buka skru(remove screw)


buka skru(remove screw)


2.Tarik keluar cover getah dari head lamp(Pull out the rubber cover from head lamp.)


Tarik cover getah keluar(Pull out the rubber cover)

cover dah dibuka(removed cover)

3.Cabut wayar mentol(pull the wiring connection from the bulb)

diy memasang projector head lamp(diy install head lamp projector)

nampak kemas dan mantap tapi kereta dah cabok (look cool with projector)
head lamp ni lampu warna kuning tak silau sangat(using normal bulb only the light not so sharps)1.Buka bonet kereta cari lokasi head lamp (find headlamp location) 2.Buka dua skru dibelakang head lamp,gunaka soket 10mm (unscrew the two bolt behind headlamp)
spring retainer untuk memegang signal lamp (spring retainer to hold the signal lamp)
signal lamp sudah dilonggarkan dari breketnya (signal lamp loosed from it brackets)
3.tarik spring sehingga signal lamp tercabut.(pull the spring retainer until it release the signal)4.cabut 2 wayar konektor.5.buka dua skru di sisi head lamp.tarik keluar head lamp.
6.masukan new head lamp.pasang semula skru belakang dan skru sisi.pasang signal semula.sambung wayar connector semula.check samada mentol menyala...selesai

diypomen facebook