1. Before you remove the rocker cover you must pull out two hose that attached to it.Loosen all the bolt and remove the cover,if it stuck use rubber hammer and hit at the edges of cover slowly until it loose.(sebelum membuka rocker cover, paip crancase dan brether paip hendalah dibuka terlebih dahulu kemudian Buka skrew rocker cover,ada enam kesemuanya.buka rocker cover ,sekiranya ketat ketuk disisi cover degan tukul getah perlahan-lahan sehinga ia longgar.)
2.Rocker cover has been removed out from the head.Used scraper to Clean all trace and old gasket that stick to head and cover area(Rocker cover sudah dibuka,bersihkan segala kotoran atau gasket lama yang melekat dikawasa head dan dikawasan rocker cover.)
New gasket(gasket baru)
3.Fit in new gasket into the rocker cover groove(Pasang gasket baru,masukkan gasket baru ke dalam alur rocker cover.)
4.Fix back all bolts to the cover,tighten it a few at a time in a cross method(to make sure all bolts will have same pressure at all area).Tighten all the bolts with a specific torque that provided in manul book.Lastly connect the hose back to the cover.(Pasang semula skrew,ketatkan skru sedikit demi sedikit ,ketatkan skru haruaslah secara bersilang supaya tekanan skru adalah seimbang di kesemua bahagian.ketatkan mengikut tork yang ditetapkan dalam manual book.(pomen old timer guna tenaga tangan saja ,sebab dia orang dah mahir,bukan apa gasket ni kalau kita ikat kuat sangat ia mudah putus so nak selamat baik pakai spana tork). ...pas tu jangan lupa pulak pasang dua paiping tadi..SELESAI. )
looking for car performance part ,please click >>>>http://performenzone.blogspot.my/
No comments:
Post a Comment