DIY MEMBUKA DAN MEMASANG MENTOL HADAPAN PROJECTOR HEAD LAMP(REMOVE AND REPLACING BULB FROM PROJECTOR HEAD LAMP)

1. Mentol depan belah kiri dah terbakar sebulan tak sempat nak tukar.Petang ni den ado masa nak tokar.Projector lamp ni susah sikit nak buka dia tak sama dengan head lamp biasa maklumlah dia banyak mentol,tapi tak lah sesusah mana kalau kita sabar sikit..ok kita mula sekarang..(my projector head lamp was burned so its time to do diy again.

Peralatan(Tools needed)

Tangan dengan screw driver aje(screwdriver)

1.Buka breket Rellay dahulu kerana ia menghalang mentol dari ditarik keluar.(open rellay bracket first cause it blocking our hand from pulling the rubber cover out.)

kotak rellay(Rellay box)

buka skru(remove screw)


buka skru(remove screw)


2.Tarik keluar cover getah dari head lamp(Pull out the rubber cover from head lamp.)


Tarik cover getah keluar(Pull out the rubber cover)

cover dah dibuka(removed cover)

3.Cabut wayar mentol(pull the wiring connection from the bulb)







4.Lepaskan klip penahan mentol dan cabut mentol,(Take out the bulb from the bracket by lossening the metal clips lock first)

5.Pasang mentol baru(semasa memasang mentol baru ,jangan pegang bahagia kaca kerana cas elecktrostatic dari badan anda boleh merosakan mentol helogan).Install the new bulb ("coution do not touch the glass bulb, cause electrostatic charge from your body will damage the bulb).

6.Sambung wayar ke mentol semula(connect back wire to the bulb)
7.Pasang penutup getah semula(Fix back the rubber cover to it place)
8.Pasang kotak rellay (Fix back the rellay box)
9.Test lampu kereta anda...selesai(Test the bulb)....completed.

diypomen facebook