CARA PEMASANGAN RADIO player KERETA ( car stereo instalation)

keselamatan(safety)

Before performing any task involving electrical components in your vehicle,make sure to first disconnect the negative battery terminal cable.If you bypass this step you run the risk of creating a short in the system,damaging the components and wiring of your vehicle.(Sebelum memulakan penyambungan wayar buka kabel negative bateri dahulu,tujuanya adalah untuk mengelakan berlakunya kejadian litar pintas semasa penyambungan wayar sedang dilakukan.)


peralatan.(tool)
=elekterik tape(electrical tape)

=pemotong wayar(wire cutter)

.after understanding entire audio wiring track in your car,then you can persued installation work,if you uncertain do not continue because of errors in wiring cause damaging your stereo.Setelah memahami keseluruhan litar radio yang baru dan litar audio dari kereta anda,maka bolehlah kerja pemasangan boleh diteruskan.Sekiranya anda tidak pasti atau was-was sebaiknya jangan diteruskan kerana penyambungan yang salah akan merosakkan radio anda



Pull out you factory stereo,remove wire entena,speaker and power supply.(cabut radio lama anda dari tempatnya ,cabut wayar entena,wayar speker dan wayar power supply.)




radio dah dicabut,wiring radio dan entena, (audio wiring from the car)
sambung wayar radio baru ke adapter wiring kereta. (connect new wiring stereo to the correct wiring from the car)


wiring bateri,ground dan accesory(wiring battery,ground and accesory)


wiring bateri,accesory dan ground dah siap (wiring battery,ground and accesory completed)



wiring speker
wiring connection
1. Battery = from radio (yellow) connect to the car (red)
2.accesory = radio (red) connect to the car (blue)
3.Ground = radio (black) connected to the car (black)
4.speaker ) left behind = radio [ (gray (+),gray and black stripes (-)] connected to the car [(Black (-), yellow / blue (+)]
5.speaker right behind =radio[Brown (+), brown dark stripe (-)] connect to the car [(black (-), yellow / red (+)]
6.speaker front left= radio [blue (+), blue-black stripe (-)] connected to the car [black / blue (-), white / blue (+)]
7.speaker right front =radio [Green (+,) green black line (-) connected to the car [black / red (-), white / red (+)]
8. connect the antenna

.sambungan wayar(wiring diagram)=
1.bateri=dari radio(kuning) sambung ke kereta(merah)
2.aksesori=radio(merah) sambung ke kereta(biru)
3.Ground=radio(hitam) sambung ke kereta(hitam)
4.speker belakang kiri =radio[(kelabu(+),kelabu jalur hitam(-)] sambung ke kereta[(hitam (-),kuning/biru(+)]
5.speker belakang kanan=radio[coklat(+),coklat jalur hitam(-)]sambung ke kereta[(hitam(-),kuning/merah(+)]
6.speker depankiri=radio[biru(+),biru jalur hitam(-)] sambung ke kereta [hitam/biru(-),putih/biru(+)]
7.spiker depan kanan=radio[hijau(+,)hijau garis hitam(-) sambung ke kereta [hitam/merah(-),putih/merah(+)]
8.sambung wayar entena.(connect the antenna)







tapekan semua sambungan wayar sekemas-kemasnya.(tape all the connected wire with electrical tape securely)



Masukkan radio ke tempat asalnya(adapter slot) dengan menolak perlahan-lahan sehinga masuk kedalam slot sepenuhnya.(slide the new stereo into the faceplate adapterslot)



-pasangkan cable negative bateri semula(when the new stereo is seated ,reconnect the grounding cable to negative lead of battery)
-on radio,test cd,mp3 dan siaran radio....selesai(test all the radio function...done

iypomen facebook

looking for car performance part click here >>>>>  http://performenzone.blogspot.my/